Do not hang any type of accessory or accessory bracket from the plug. Insert the belt tongue into the proper buckle the buckle closest to the direction the tongue is coming from for that seating position until you hear a snap and feel the latch engage. Speed sensitive volume if equipped With this feature, radio volume automatically changes slightly with vehicle speed to compensate for road and wind noise. Attach the strap hook onto the loop behind an adjacent seating position. The cover may be removed from the vehicle by sliding it sideways out of the front rail.
Do not leave the vehicle unattended with the transfer case in the N Neutral position. Position the child safety seat on the seat cushion. Pull bulb straight out of socket and press in the new bulb. Since plate is custom made, it is not a serviceable part. Turn off the engine and remove the key.
Always transport children 12 years old and under in the back seat and always properly use appropriate child restraints. The tires may fail and injure a passenger or bystander. Windshield washer fluid reservoir 9. This lighting feature is operable when the headlamps are illuminated. Transmission fluid dipstick automatic transmission 11. Note: In the illustrations, lightning bolts are used to designate the assisting boosting battery. Mode selector control Controls the direction of the airflow to the inside of the vehicle.
Programming your own personal entry code To program your own code: 1. This mode disables the keypad for one minute and the keypad lamp will flash during this time. Insert the tongue into the correct buckle for that seating position until you hear and feel the buckle engage. Speaker fade adjust Speaker sound can be adjusted between the front and rear speakers. Use of these systems may result in vehicle starting problems and a loss of security protection. Press the - control to decrease volume. Follow the instructions in this chapter.
Odometer: Registers the total kilometers miles of the vehicle. Turn the control to raise or lower volume. If the dealership employees cannot help you, they can direct you to the nearest Ford affiliate office. The fuel gauge may vary slightly when the vehicle is in motion or on a grade. This program is separate from the New Vehicle Limited Warranty. Press and release this control to decrease the vehicle set speed in small amounts by 1.
The overdrive function allows automatic upshifts and downshifts through all available gears. Under no circumstance should these limitations be exceeded. The fuel system may be under pressure. If your vehicle requires professional service, your dealership can provide the necessary parts and service. If a replacement oil filter is used that does not meet Ford material and design specifications, start-up engine noises or knock may be experienced. Ensure that the seat is relatched into place. Power steering fluid reservoir 2.
Note: Do not start your engine with the air cleaner removed and do not remove it while the engine is running. Always set the parking brake fully and turn off the ignition when leaving the vehicle. Flash to pass Pull toward you slightly to activate and release to deactivate. Using a fuse with a higher amperage rating can cause severe wire damage and could start a fire. Each seating position in your vehicle has a specific safety belt assembly which is made up of one buckle and one tongue that are designed to be used as a pair.
High fluid level Fluid levels above the safe range may result in transmission failure. Install the bulb socket in lamp assembly by turning it clockwise. The foglamp indicator light will illuminate. Fuel vapor is extremely hazardous under certain conditions. Set the parking brake and ensure the gearshift is securely latched in P Park automatic transmission or 1 First manual transmission. This information will assist Ford Motor Company in servicing the vehicle and in helping to better understand real world collisions and further improve the safety of future vehicles. For more information on starting the vehicle, refer to Starting the engine in this chapter.